MKR - marker control. Pressing and holding the button for more than two seconds opens the menu for configuring markers and peak values of the analysed signal.
MENU - opens the device’s main menu.
FREQ - displays the frequency parameters. Pressing and holding the button for more than two seconds opens the frequency-span settings menu.
FREQ - displays the frequency parameters. Pressing and holding the button for more than two seconds opens the frequency-span settings menu.
7-8. Buttons for moving the display grid and adjusting the frequency. 9-10. SPAN - frequency-span controls. Use the minus and plus buttons to adjust the frequency range of the analysed signal.
Power button.
Compartment for an additional battery.
USB cable for connecting the device to a charger or an additional battery.
Handle mounting slot.
Pressure equalisation valve. Do not touch.
Cable connector.
KM-12 antenna mounting assembly.
Lock-release button.
Cable for connecting the antenna to the spectrum analyser.
R101C antenna mounting assembly.
Lock-release button.
Cable for connecting the antenna to the spectrum analyser.
OPERATING TIME Approximately four hours using the main battery, plus up to eight additional hours using the auxiliary battery. OPERATING FEATURES The device has been modified for all-weather operation. ASSEMBLY
Insert the handle into the device mounting slot until it is fully secured by the magnets.
Install the KM12-2400/5000 antenna by pressing the lock-release button, item 19, and inserting the antenna into the mounting assembly, items 14 and 18. Alternatively, install the R101C antenna by pressing the lock-release button, item 22, and inserting it into the mounting assembly, items 14 and 21.
Important: the antenna must be inserted with the button facing upwards.
Connect the antenna cable, item 20 or 23, to the connector, item 17.
The device is now ready for operation. DEVICE CONTROL The device can be operated using the touchscreen or the control buttons, items 3-10. SWITCHING THE DEVICE ON AND OFF The power button, item 11, is located at the top of the right-hand side panel. Press and hold the button for approximately two seconds to switch the device on or off. If the device does not switch on or off, repeat the procedure.